Project:HUGnet Endpoint Test Jig

From HUG Wiki

Hardware

USB Hub
AVRISP mkII USB avr programmer
USB->RS485 bridge
controller board
fixture to attach test board to.

Fixture

The enclosure will be two plastic double gang electical boxes. The one will have a bare endpoint baord with female connectors on the back of it, the other will contain the controller board.

The endpoint board will be to attach to the board being tested.

It will have a wall pack plug and a USB connection to the computer.

It could boot off of a USB jump drive.


HUGnet Hardware Core Endpoint Endpoint Programmer Daughter Board Data Collector Controller Board Sensor Types Other Hardware Troubleshooting Endpoint Test Jig HUGnet Firmware Endpoint/Controller Firmware Core Firmware Core User Interface	HUGnet Software Scripts Software Installation HUGnetLib Packet Structure Packet Commands Unsolicited Packets Sensor Decoding ComHUGnet HUGnet Core User Interface Troubleshooting HUGnet Misc HUGnet Part Numbers Minimum System	HUGnet Servers Database Server Web Server HUGnet Random Ideas Low Power Considerations Virtual Sensors HUGnet Theory Power Supply Theory Calculations Design Criteria

Project:HUGnet Endpoint Test Jig

From HUG Wiki

Hardware

Fixture

See Also

Views

Personal tools

Navigation

Search

Toolbox